FOR USE WITH STANDARD LAYOUT KEYBOARDS & INTERACTIVE PEN DISPLAYS
CINTWEAK S•UNI UNIVERSAL KEYBOARD TRAY
The CinTweak S•UNI Universal keyboard tray is designed for use with a STANDARD LAYOUT KEYBOARD and a variety of interactive pen displays from Wacom, Artisul, Gaomon, Huion, Viekk, and XP-Pen!
CinTweak UNI keyboard trays are adjustable for the following interactive pen displays:
- Wacom: ONE
- Wacom Cintiq Series: 21UX, 22HD, 24HD, 27QHD, 16, PRO16, PRO24, PRO32, 22, PRO27
- Artisul: D16, D16Pro, D22S
- Gaomon: PD1560, PD156Pro, PD2200
- Huion Kamvas Series: 13, 16, 20, 22, 22Plus, 24, 24Plus, Pro24, Pro24 4K
- UGee: U1200-V4, U1600
- Veikk: VK1200, VK1560, VK22009 Pro
- XP-PEN Artist Series: 12, 16, Pro 16, 22, 22RPro, 24, 24PRO
If your interactive pen display is not listed, please measure the distance from the top edge of your active display area to the top edge of your tablet before you place an order.
- You must have at least 1.5 cm (1/2 inch) distance from the top edge of your active display area to the top of your tablet to use this product.
- If you have more than 1.5 cm (1/2 inch) distance from the top edge of your active display area to the top of your tablet, you are good to go.
DO NOT SKIP THE INSTALLATION GUIDES!
Upon arrival, your tray will be in standard shipping configuration at the highest tray setting and will need to be adjusted to PROPERLY FIT your particular tablet. While the guides are simple and straight forward, following them is crucial to getting a good fit for your new keyboard tray.
Installation Guides for a variety of interactive pen displays can be found down below on this page or on YouTube:
Click Here for CinTweak Installation Guides on YouTube
PLEASE NOTE YOUR PURCHASE OPTIONS:
If you are purchasing a S•UNI Tray for Side Mounting with the following Tablet/Stand configurations:
- Wacom Cintiq 27QHD and Ergo Stand
- Wacom Cintiq Pro24 and Ergo Stand
- Wacom Cintiq Pro32 and Ergo Stand
S•UNI Trays are NOT COMPATIBLE for Side Mounting with these configurations due to the size/position of the Ergo Stand's Tilt Paddles.
Modified X•UNI Trays with Additional Holes for Wider Mounting ARE COMPATIBLE for Side Mounting with these Tablet/Stand configurations.
additional information
WILL MY KEYBOARD FIT?
Keyboards with a width of 6.5 inches or less are the best candidates for use with the CinTweak Trays.
If you are purchasing a S•UNI Tray, your keyboard should be less than 13 inches in length.
If you are purchasing a X•UNI Tray, your keyboard should be 13 inches or greater in length.
WILL MY KEYBOARD WORK?
Keyboards that do not have a flat front edge, like the MicroSoft Ergonomic keyboards which incorporate a curvy palm rest are not viable candidates for use.
Keyboards that are more than 6.5 inches in width from the front edge to the back edge, are not recommended because the keyboard will begin to act as a lever...too much overhang.
Keyboards that do not have a flat surface on the underside are not viable candidates for use because there may not be sufficient area to place the sticky Velcro pads for attachment.
STILL HAVE QUESTIONS ABOUT YOUR KEYBOARD?
Contact me with the make and model of your keyboard and I will be happy to take a look at it and give you my recommendations:
email:sales@CinTweak.com
phone: 702 818 3964
PROPER USE GUIDELINES
NEVER rest your keyboard on your CinTweak keyboard tray without the keyboard's Velcro® pads attached, and the tray's arms attached to the rear safety Velcro on the back of your interactive pen display.
NEVER attempt to move your tablet using your CinTweak keyboard tray as a lever or handle.
NEVER attach or remove your keyboard while the tray is on your tablet unless you are using the quick release velcro dots. Remove the tray first, make your adjustments then place the tray back on your tablet.
Improper use may lead to injury, damage to your tablet, dismemberment, tooth decay, hair loss, and in rare cases, destruction on a global scale leading to the extinction of the human race.
CLEANING YOUR TRAY & TABLET
Do not use any chemical or alcohol based cleaner to clean your CinTweak keyboard tray.
Alcohol based cleaners may damage both your CinTweak keyboard tray and your tablet's drawing surface.
A damp cloth is all you need to keep your tablet and your tray clean.
LEFT RIGHT OR CENTER?
If you key with one hand exclusively, you might want your keyboard positioned based on your keying hand.
But it is really dependant on your application workflow. Some workflows cause you to use both hands to keystroke.
Install both central and keying hand side positioning and you can change position based on your current workflow.
CONSIDER USING MULTIPLE KEYBOARDS
Just like multiple monitors, you can use multiple keyboards with your computer. It's a great option for multi-monitor / multi-position desk setups.
If your tablet takes up the bulk of your desk space, you might consider an under desk keyboard tray for extended typing in addition to the CinTweak mounted to your display for keying while you create.
If you have to contort your spine or twist to access a keyboard currently, you really should consider all the ways you can improve the ergonomics of your work space to provide you the most comfortable and conducive creative environment.
ARE YOU STILL STICKING TO YOUR TABLET?
Besides the art glove you probably use, you might want to also consider an athletic sleeve.
These sleeves, made of the same material as your glove, eliminate a lot of the wrist and forearm sweat your stroking hand leaves on the surface of your tablet. You can find all kinds of athletic sleeves on Amazon.
